Large notcher MZ 02 90F A E
5.375,00 € without VAT.
The large notcher MZ 02 90F A E has been designed for processing cross laminated timber, solid laminated timber or CLT.
Roundings on inside corners that remain after milling a cut-out are removed.
The repositioning of the often very large workpieces is saved in the work process. They remain outside the CNC machine for milling the inside corners with the large notcher MZ 02 90F A E. The customer of the workpiece receives a higher quality workpiece.
Description
The large notcher MZ 02 90F A E is designed for processing solid laminated wood. The capacity of the MZ 02 90F A furniture notcher (without E) is no longer sufficient for this. Roundings on inside corners are removed. These were previously left behind when milling a cut-out. The machine is constructed from aluminium plates. Weight: 13.5 kg.
When milling a cut-out in glulam, the cut-out part remains in the workpiece. The workpiece must be removed from the machine to remove it. Subsequent repositioning is therefore necessary. This is time-consuming and expensive.
The large notcher MZ 02 90F A E eliminates the need for repositioning with milling accuracy. While the roundings in the inside corners of the first workpiece are being removed, a second workpiece can already be processed on the milling machine.
The processing is taken off the customer's hands, which is becoming increasingly popular as a general trend.
Further information
Large notcher MZ 02 90F A E
for corner notching with electric motor
- Stop elements for attaching to the sides of the inside corners
- 1 piece V-shaped milling cutter, tipped, shank 8 mm, point angle 90°. Depending on the cutter, a remnant may remain in the inside corner, forming a plane approx. 1.5 mm wide.
- Linear guide
- Adjustment of the motor to the stops
- Detachable fixing of the 0-position of the adjustable stops
- Mounting for Suction hose
- Switching on/off Directly on the motor
- Weight about 13 kg
- Exclusively for removing the radius on 90° inside corners on panelled materials made of pine and spruce.
Working method/limit values:
1. Maximum Thickness of the workpiece: 220 mm, larger on request
2. Minimum Length the shortest side in an all-round enclosed Excerpt:
about 350 to 400 mm.
3. Maximum inner radius: 20 mm, larger on request
4. To limit the tears/fraying on the top and underside, the V-shaped milling cutter must be advanced carefully, slowly and without lateral displacement up to the maximum milling width and a few millimetres beyond this into the workpiece.
Only after this pre-milling can through-milling be carried out across the width of the workpiece with the exit on the opposite, pre-milled side.
5. Depending on the type of milling cutter used, a remnant remains in the inside corner, forming a plane about 1.5 mm wide.
English 
German 
Italian 
Polish 
French 
Spanish 
Danish 
Swedish 
Finnish